Settings : Server

Turn on the Aurender Application and then tap the Settings icon   located in the upper right hand corner of the screen under the search window.

  

 Press the server tab and related options will appear in the window on the right.
  

  

   

Select the Aurender music player by tapping the name. The application will connect to the server and a check mark will appear next to the name.

Change Server Name

Type in the new name and tap Save.

Network Information

Displays Server Name, IP Address, Subnet Mask, Gateway, DNS, MAC Address and other information.

Disk Information

Lists Volume Label, Aurender State (On/Off/Standby), Space Used, Space Free, Space Total, and Folder Path.

Set Date and Time

Sets the Aurender time and date to the iPad.

Set Aurender to iPad Language

Please note that with some languages, characters may appear broken, unless the language setting is set to those languages. For this reason, we recommend setting the Language to the Language of the iPad. (from App 1.5.09 /System Software 2.0.41 and above)

Use Standby

Setting this to ON will enable the Aurender to be turned on and off using the iPad. However, when this setting is enabled, pressing once on the front panel Power button will only put the Aurender into Standby Mode. To turn the Aurender completely off, the Power button needs to be depressed until the Power button light starts to flash. Release and wait for the Aurender to power down and shut off completely. Improperly shutting down or abruptly disconnecting power to the Aurender may cause permanent damage to system. (from App 1.5.09 /System Software 2.0.41 and above)

System Commands

Standby – When in standby mode, press this button to remotely toggle the Aurender on, 
or put into standby.
Restart – Press to reboot the Aurender.
Turn Off – Press to power down and completely turn off the Aurender.

Remote Support Request from Server menu

Users can now also request remote support by long pressing the server name on the server list and then pressing the Start Remote Support button as shown below:
 

  

Top